Fuel sight tubes

[Kinoav8r]

To go along with the discussion on Husky-L, here's a suggestion TomD made a while ago. I cut this into a strip and put it behind the sight tubes. It makes it easier to see the fuel level. I think I laminated it to make it last.

 

[Snowbirdxx]

Thanks Don,

the idea behind the spripes is, that the stripes will be seen horizontally if there is no fuel in the gauges, and under 45° if ther is fuel in the gauges. That is because of the light gets deviated in the fuel filled tubes. Very easys to determine fuel level.

TomD

 

[bumper]

I opened that attachment and my eyes rebooted and immediately went into self test mode . . . all I saw were these thick black and white bands. Will be going to the eye doctor tomorrow.

bumper

 

[Snowbirdxx]

Bumper,

I hope the eye doc let you keep the medical. Print this thing out and get the angle of the fuelsight tubes , which is about 45°. Make now a stripe that had that angle with the black and white going through it horizontally.

Place that stripe behindthe fuelsight tubes.

Go now to the psYciatrist.....at least at our fuelprices....

TomD