wyopilotwyatt
New Member
Any pics for USB charger installs in A1A other than instrument panel? No room there.
Thomas, who makes that?View attachment 6851 View attachment 6852
These housings fit nice in the RH Panel near the alternate static source.
Here is where I put it (Garmin GSB 15) for the rear seat passenger. Super easy install. I had an avionics shop install the power and ground pins in the included wiring harness since I don't have one of those $400 fancy pin crimpers to do the job correctly. Cost me $10. Took off the outside panel, drilled the mounting holes with a step-drill bit, ran the ground to the frame and the power wire to a 5-amp resettable breaker and a jumper from the breaker to the battery master relay. Installed the breaker just above the battery master relay. Labeled the wires and the breaker. Maybe 2 hrs work total. I'm slow. I.A. looked it over and signed it off in log book.Any pics for USB charger installs in A1A other than instrument panel? No room there.
Until USB-Fme comes out…Also, if installing a new mount, go with USB-C as that’s the future of course.